Straight Edge Square Rubber Tile: 2′ x 2′ x 3/8″

*Other Colors (non-black): Select either 10% or 20% Color above, then note your color in the “Comments” box during check-out!

Available Colors (other than Black): Red, Green, Blue, Off-White, Blue and Gray, Brick and Stone, Brick Red, Confetti, Fiesta, Heavy Stone, Hunter Green, Hunter Stone, Plum, Plum Stone, Stone

Straight Edge Square Rubber Tile: 2′ x 2′ x 3/8″

State-of-the-art polymer technologies have revolutionized the sports flooring business. Architects and designers have come to realize the fact that recycled products can perform at the same high levels as virgin rubber at a substantial cost savings. SureFlexx Tiles are the perfect flooring solution for a wide variety of uses including: Fitness Centers, Day Care, Ice Rinks, Golf Courses, Museums, Student Centers, Wellness/Therapy Centers, Retail or Office, Locker Rooms, Stadiums and more.

Product Specs

• Description: 2’x2′ Rubber Athletic Flooring made from recycled rubber tires in either square cut for glue down installation or puzzle cut for interlocking installation.
• Thickness: 3/8″ (9MM) or 1/2″ (12MM)
• Materials: Recycled Rubber
• Colors: Black, Confetti, White, Gray, Red, Blue – Contact us for a quote on other custom colors.
• Maintenance: Damp mop and dry
• Odor: Non-odorous, non-toxic
• Acoustics: Rates superior
• Origin: United States of America

Shipping Information

• Availability: The 5 standard colors above are ready to ship from the factory within 5-6 business days. Travel time from the factory is 2-6 days.
• Location: Ships from the Colton, CA factory.
• Weights:
  • 3/8″ Interlocking – 10 lbs per tile
  • 1/2″ Interlocking – 12 lbs per tile
  • 3/8″ Glue Down – 9 lbs per tile
  • 1/2″ Glue Down – 11 lbs per tile

Installation

Non-wall to wall, No Cutting

1. Clean and clear the subfloor of all dust, dirt and debris.
3. Start at a corner and put down the border tiles forming an “L” shape. Fill in the remaining rubber tiles as you see fit.

Wall to wall, Cutting:

1. Clean and clear the subfloor of all dust, dirt and debris.
2. Snap 2 perpendicular chalk lines 24″ from the wall. Repeat with the opposite corner to form a 24″ border around the room.
3. Start atone corner inside of the chalk lines as and put down tiles from there to create an “L” shape. Fill in the remaining space inside the chalk lines as seen fit.
4. It is suggested that when doing a wall to wall installation, you leave a gap between the mat and the wall, about the thickness of the mat – to allow for expansion when the seasons change.
5. Start cutting in tiles along the walls of the room.

When using the interlocking tiles, adhesive is not usually required, the weight of the mats should be enough to hold the mats in place. If you do however experience shifting, we suggest you use some double sided carpet tape either around the perimeter or down each row at the connections.

Note: In glue down installations, it is strongly recommended that you go over the mats with a 100 lb roller to ensure a proper bond. If a roller cannot be located for use, alternatively, you can walk on the mat, using small overlapping steps making sure that every inch of the mat has been walked on.

Maintenance

Clean with a damp mop and air dry. If you use soap, use dish soap or laundry detergent.