Enable for instant discounts.

close

My Account - Register / Sign In

Lost your password? Click Here
Having Trouble logging in? Click Here then close and reopen your browser to clear cookies set by Practice Sports(item will be removed from your cart and need to be re-added)

*Customer Information

Billing Address

Shipping Information

Account Information

Motorcycle Spring Rider

SKU: SP250M-x

FreightShipping rate calculated at checkout

$611.00

$611.00
x
Quantity:

The Motorcycle Spring Rider is made of a durable rotationally molded polyethylene with weather resistant decals. It comes in bright colors that resist fading. Each one comes with a spring that is enclosed by a rubber boot, which helps to prevent pinching and provides a smooth ride.

Decals are applied with heat. They will be hard to remove and resist fading.

The airplane dimensions are 9″ from ground to seat, 15” from bottom to top of airplane cabin and is 36” from front to back. The motorcycle is 18”.from ground to seat. 25” from bottom to top of handles and is 35” front to back. The plate is 10″ square 8.25″ center to center.

Colors: Blue, Green, Red and Yellow

Safety Requirements

  • Ages 2-12
  • One Child at a Time
  • Adult Supervision Necessary
  • No Standing or Using the Spring Rider in an Unsafe Manner
  • Do Not Use if Damaged

IMPORTANT:

Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also, these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.

To help keep children safe from harm, review installation and maintenance instructions before installing equipment. Download and print these instructions and keep in a safe place. All products are tested for lead, phthalates and tensile strength.

Installation Instructions

  • For toddler’s, seat should be between 12 – 16” high.
  • For preschoolers, seat should be between 14 – 28” high.

The use zone should be a minimum of 6’ from the “at rest” perimeter of equipment. It may overlap in certain instances. See CPSC for more information. Determine correct footing locations and dig footings. The hole size may vary depending on local soil, weather conditions and local laws. Attach spring to bottom plate using SPR casting.

Pour concrete into footing hole and level off. Using 9 1/4” x 9 1/4” bottom plate on assembled spring as a template, insert ½” anchor bolts into the concrete. Remove spring assembly. Allow to set 2 – 3 days.

NOTE: Allow enough thread on anchor bolts to secure bottom plate to footing.

Place assembled body into position. Attach bottom plate to anchor bolts using ½” lock nuts and ½” flat washers. Tighten nuts and bolts. Install resilient surfacing material.

Maintenance

At beginning and end of each play season and once a month during play season, check for cracks, rust, missing or loose hardware or evidence of vandalism. Make sure there are no tears in rubber boot that children could get their fingers pinched in spring. Tighten and lubricate all metallic moving parts. Replace as needed. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around the spring rider. Maintain detailed inspection and maintenance records for public-use playground equipment.

Any damage from vandalism, abuse, or misuse VOIDS all warranties.

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Motorcycle Spring Rider”

Your email address will not be published. Required fields are marked *

The Motorcycle Spring Rider is made of a durable rotationally molded polyethylene with weather resistant decals. It comes in bright colors that resist fading. Each one comes with a spring that is enclosed by a rubber boot, which helps to prevent pinching and provides a smooth ride.

Decals are applied with heat. They will be hard to remove and resist fading.

The airplane dimensions are 9″ from ground to seat, 15” from bottom to top of airplane cabin and is 36” from front to back. The motorcycle is 18”.from ground to seat. 25” from bottom to top of handles and is 35” front to back. The plate is 10″ square 8.25″ center to center.

Colors: Blue, Green, Red and Yellow

Safety Requirements

  • Ages 2-12
  • One Child at a Time
  • Adult Supervision Necessary
  • No Standing or Using the Spring Rider in an Unsafe Manner
  • Do Not Use if Damaged

IMPORTANT:

Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also, these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.

To help keep children safe from harm, review installation and maintenance instructions before installing equipment. Download and print these instructions and keep in a safe place. All products are tested for lead, phthalates and tensile strength.

Installation Instructions

  • For toddler’s, seat should be between 12 – 16” high.
  • For preschoolers, seat should be between 14 – 28” high.

The use zone should be a minimum of 6’ from the “at rest” perimeter of equipment. It may overlap in certain instances. See CPSC for more information. Determine correct footing locations and dig footings. The hole size may vary depending on local soil, weather conditions and local laws. Attach spring to bottom plate using SPR casting.

Pour concrete into footing hole and level off. Using 9 1/4” x 9 1/4” bottom plate on assembled spring as a template, insert ½” anchor bolts into the concrete. Remove spring assembly. Allow to set 2 – 3 days.

NOTE: Allow enough thread on anchor bolts to secure bottom plate to footing.

Place assembled body into position. Attach bottom plate to anchor bolts using ½” lock nuts and ½” flat washers. Tighten nuts and bolts. Install resilient surfacing material.

Maintenance

At beginning and end of each play season and once a month during play season, check for cracks, rust, missing or loose hardware or evidence of vandalism. Make sure there are no tears in rubber boot that children could get their fingers pinched in spring. Tighten and lubricate all metallic moving parts. Replace as needed. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around the spring rider. Maintain detailed inspection and maintenance records for public-use playground equipment.

Any damage from vandalism, abuse, or misuse VOIDS all warranties.

Reviews

There are no reviews yet.

Be the first to review “Motorcycle Spring Rider”

Your email address will not be published. Required fields are marked *

Recommended for You