close

My Account - Register / Sign In

Lost your password? Click Here
Having Trouble logging in? Click Here then close and reopen your browser to clear cookies set by Practice Sports(item will be removed from your cart and need to be re-added)

*Customer Information

*Billing Address

Shipping Information

*Account Information

Bee Spring Rider

SKU: SP200B

FreightShipping rate calculated at checkout

$858.00

x
Quantity:

This spring rider is designed for durability and safety. The body of the rider is made of rotomolded polyethylene, which is resistant to weather and fading. The bright colors are applied with heat to prevent vandalism and resist fading over time. Each rider comes with a spring that is enclosed by a rubber boot, which helps to prevent pinching and provide a smooth ride for children.

The plate of the rider measures 9¼” square and has four holes that are 1″ from the edge of the plate. The center-to-center distance between the holes is 7¼”. The bottom of the bee-shaped rider is 13¼” from the ground, while the distance from the ground to the top of the seat is 22¼”. Hardware for installation is included with the rider.

This product withstands harsh conditions and lasts up to 5 years, although replacement may be necessary sooner depending on the conditions. The Bee spring rider has a weight limit of 125 lbs and is a great addition to any playground.

Colors: Yellow with a red smile

Safety Requirements

  • Ages 4-12
  • One Child at a Time
  • Adult Supervision Necessary
  • No Standing or Using the Spring Rider in an Unsafe Manner
  • Do Not Use if Damaged

IMPORTANT:

Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also, these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.

To help keep children safe from harm, review installation and maintenance instructions before installing equipment. Download and print these instructions and keep in a safe place. All products are tested for lead, phthalates and tensile strength.

Temperature Safety

Regardless of lower heat transfer properties, plastic play equipment can still become hot enough in extreme temperatures and direct sunlight to cause burns. Plastic slides are safe, tried and true, but as is the case with all playground equipment, parents and supervisors must monitor the children in their care, make certain that the equipment is appropriate for their age, and always check playground surfaces for excessive heat before allowing children to play. For more information, contact IPEMA headquarters at www.communications@ipema.org or by calling 1717‐238‐1744.

Installation Instructions

  • For toddler’s, seat should be between 12 – 16” high.
  • For preschoolers, seat should be between 14 – 28” high.

The use zone should be a minimum of 6’ from the “at rest” perimeter of equipment. It may overlap in certain instances. See CPSC for more information. Determine correct footing locations and dig footings. The hole size may vary depending on local soil, weather conditions and local laws. Attach spring to bottom plate using SPR casting.

Pour concrete into footing hole and level off. Using 9 1/4” x 9 1/4” bottom plate on assembled spring as a template, insert ½” anchor bolts into the concrete. Remove spring assembly. Allow to set 2 – 3 days.

NOTE: Allow enough thread on anchor bolts to secure bottom plate to footing.

Place assembled body into position. Attach bottom plate to anchor bolts using ½” lock nuts and ½” flat washers. Tighten nuts and bolts. Install resilient surfacing material.

Maintenance

At beginning and end of each play season and once a month during play season, check for cracks, rust, missing or loose hardware or evidence of vandalism. Make sure there are no tears in rubber boot that children could get their fingers pinched in spring. Tighten and lubricate all metallic moving parts. Replace as needed. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around the spring rider. Maintain detailed inspection and maintenance records for public-use playground equipment.

Any damage from vandalism, abuse, or misuse VOIDS all warranties.

You may also like…

Reviews

There are no reviews yet.

Be the first to review “Bee Spring Rider”

Your email address will not be published. Required fields are marked *

This spring rider is designed for durability and safety. The body of the rider is made of rotomolded polyethylene, which is resistant to weather and fading. The bright colors are applied with heat to prevent vandalism and resist fading over time. Each rider comes with a spring that is enclosed by a rubber boot, which helps to prevent pinching and provide a smooth ride for children.

The plate of the rider measures 9¼” square and has four holes that are 1″ from the edge of the plate. The center-to-center distance between the holes is 7¼”. The bottom of the bee-shaped rider is 13¼” from the ground, while the distance from the ground to the top of the seat is 22¼”. Hardware for installation is included with the rider.

This product withstands harsh conditions and lasts up to 5 years, although replacement may be necessary sooner depending on the conditions. The Bee spring rider has a weight limit of 125 lbs and is a great addition to any playground.

Colors: Yellow with a red smile

Safety Requirements

  • Ages 4-12
  • One Child at a Time
  • Adult Supervision Necessary
  • No Standing or Using the Spring Rider in an Unsafe Manner
  • Do Not Use if Damaged

IMPORTANT:

Please read for important information. In this material we have tried to provide some requirements stated in the CPSC Handbooks, ASTM F2373-11, F1487-11 and F1148-09. However, we in no way intend for this to be a complete list of requirements. Also, these publications are updated frequently with changes therefore, you should read these publications yourself to determine if any part or installation could prove a danger to a child.

To help keep children safe from harm, review installation and maintenance instructions before installing equipment. Download and print these instructions and keep in a safe place. All products are tested for lead, phthalates and tensile strength.

Temperature Safety

Regardless of lower heat transfer properties, plastic play equipment can still become hot enough in extreme temperatures and direct sunlight to cause burns. Plastic slides are safe, tried and true, but as is the case with all playground equipment, parents and supervisors must monitor the children in their care, make certain that the equipment is appropriate for their age, and always check playground surfaces for excessive heat before allowing children to play. For more information, contact IPEMA headquarters at www.communications@ipema.org or by calling 1717‐238‐1744.

Installation Instructions

  • For toddler’s, seat should be between 12 – 16” high.
  • For preschoolers, seat should be between 14 – 28” high.

The use zone should be a minimum of 6’ from the “at rest” perimeter of equipment. It may overlap in certain instances. See CPSC for more information. Determine correct footing locations and dig footings. The hole size may vary depending on local soil, weather conditions and local laws. Attach spring to bottom plate using SPR casting.

Pour concrete into footing hole and level off. Using 9 1/4” x 9 1/4” bottom plate on assembled spring as a template, insert ½” anchor bolts into the concrete. Remove spring assembly. Allow to set 2 – 3 days.

NOTE: Allow enough thread on anchor bolts to secure bottom plate to footing.

Place assembled body into position. Attach bottom plate to anchor bolts using ½” lock nuts and ½” flat washers. Tighten nuts and bolts. Install resilient surfacing material.

Maintenance

At beginning and end of each play season and once a month during play season, check for cracks, rust, missing or loose hardware or evidence of vandalism. Make sure there are no tears in rubber boot that children could get their fingers pinched in spring. Tighten and lubricate all metallic moving parts. Replace as needed. Make sure there are no exposed footings, anchoring devices, rocks, roots, holes or any other obstacles in or around the spring rider. Maintain detailed inspection and maintenance records for public-use playground equipment.

Any damage from vandalism, abuse, or misuse VOIDS all warranties.

Reviews

There are no reviews yet.

Be the first to review “Bee Spring Rider”

Your email address will not be published. Required fields are marked *

Recommended for You