Pro Model – 70 Ft Long Outdoor Batting Cage Frame, Double-Lane

Pro Model – 70 Ft Long Outdoor Batting Cage Frame, Double Lane

If you’re looking for a legitimate professional-grade outdoor batting cage, instead of a “jungle gym” of steel tubing – this is it.

This DOUBLE-LANE outdoor cage gives your players MORE cuts in the cages, side by side.

Our Pro Model cage system creates a full-length pro-style cage without the hassle of concreting extra poles, eliminates the chance of ball ricochet, prevents balls from escaping (even in high winds) & reduces the “tunnel effect” (heights as tall as 16’H).

Popular Cage Sizes Compatible With This Kit:

• 70’L x 28’W x 14’H + Divider Curtain
• 70’L x 24’W x 12’H + Divider Curtain
• 70’L x 28’W x 16’H + Divider Curtain
• (2) 70’L x 14’W x 14’H
• (2) 70’L x 14’W x 12’H
• Shop Stock Batting Cage Nets
• Custom Batting Cage Nets: Custom Net Calculator

Benefits

• Minimizes number of ground holes (only 6)
• Accommodates nets up to 16’H
• Eliminates any chance of ball ricochet, due to no cross-member or center up-rights
• Very clean and professional appearance – less number of obtrusive frame poles – net maintains boxy look with cable system
• Slide curtain to either end, creating a wide-open playable area
• Frame coated with all-weather Black paint — other colors available for cost
• Welded top caps prevents water from collecting / bees from nesting
• Optional bottom cable system contains balls inside tunnel despite wind conditions (also maximizes cage height – 12″ of net ground sag no longer needed)
• Divider curtain stretch minimized with optional bottom cable system (can be easily removed)
• Optional Winch system allows net to be quickly raised and lowered, making net maintenance simple

Standard Parts List

• (6) 21’L Poles (w/top caps)
• (4) Singe front tab brackets with 1 dog ear on each
• (2) Double front tab brackets with 2 dog ears on each (for 2 individual tunnels side by side)
• (6) Turn-buckles, 9″ x 5/8″
• (4) Turn-buckles, 6″ x 1/2″
• (6) 75′ Rolls 1/4″ Cable (top linear lines)
• (4) 16′ Rolls 1/4″ Cable (horizontal end lines)
• (210) Steel Snap-hooks
• (24) Cable Clamps, 1/4″
• (16) Cable Clamps, 1/4″

Top Bridge Suspension Systems (Included with Standard Parts Listed Above)

• (2) Double front tab brackets
• (4) 4″ x 5/8″ Eyebolts
• (4) 6″ x 1/2″ Turn-buckles
• (16) 1/4″ Cable Clamps
• (4) 85′ Rolls 1/4″ Cable

*Please advise on your net layout, i.e. (2) 70x14x12’s or (1) 70x28x14 etc. – will affect your exact parts

Steel Specs

• 6-5/8″ Round OD
• Schedule 40+ — Thicker than 1/4″ walls
• Coating is optional (see above): Galvanized Steel or Gallon Black Paint shipped

Optional Item

Bottom Anchor System

Anchors outside walls & end of net to rigid cables, preventing net from blowing in wind (damage risk), and eliminates need to let 12″ pool on the ground, maximizing playable height!

• (3) 75′ Rolls1/8″ Galvanized Cable (+1 Cable needed if using 2 individual tunnels)
• (4) 16′ Rolls 1/8″ Galvanized Cable
• (7) Turn-buckles, 6″ x 1/2″
• (4) Single front tab + 1 dog ear(Double-anchor needed for 2 individual tunnels)
• (2) Double front tab + 2 dog ear (for 2 individual tunnels side by side)
• (28) Cable Clamps, 3/16″
• (1) Bag UV-resistant Wire Ties (hog rings & pliers optional)

*Please advise on your net layout, i.e. (2) 70x14x12’s or (1) 70x28x14 etc. – will affect your exact parts

*Minimum 5′ deep holes required with minimum 30″ – 36″ diameter base (depending on soil conditions and freeze line) – loose/sandy soil should be wider

*Top Bridge Suspension System not included when: Winch System is ordered, or net height greater than 14′. Must have minimum of 2′ between top of net & bridge system for effective use.

*Detailed Instructions & hole diagram provided upon ordering

• 25-year warranty on Frame System
• Ships within approximately 1 week
• Freight Estimate: $400-$600 pending location