Pro Guide: Outdoor Batting Cage Installation Kit in 8 Steps By Cari | Published on August 18, 2025August 18, 2025 Building a training space at home or for a team starts with the right materials, and an outdoor batting cage installation kit is the perfect solution. With the right kit, you can set up a pro-level cage that provides safe, reliable practice for years to come. In this guide, we’ll walk you through the 8 essential steps, covering everything from planning and setup to the final safety check. Use this article to follow along with the included video and you’ll be ready to start practicing or training in no time. Step 1: Prepare Sub-Base and Dig Holes (00:58) Mark your layout and dig six holes (5′ deep, 30″–36″ wide) for the steel poles. A solid sub-base ensures stability and long-term durability. Every successful outdoor batting cage installation kit build starts with the foundation. In the accompanying video, Coach Shane Moore of the Christian Academy Falcons in Franklin, TN, begins by preparing the ground and digging post holes according to the cage layout. For this project, he demonstrates the prep work for a 28′ x 75′ area, making sure everything is level before installing a 70′ long cage. The Pro Model Double Lane Frame requires just six ground holes, which is far fewer than traditional cages, saving both time and cost. Holes should be dug at least 5′ deep with 30″–36″ diameter bases to support the heavy-duty 6-5/8″ OD galvanized steel poles. In looser soils, consider widening the holes for extra stability. A solid sub-base ensures the poles sit evenly and remain stable over time, providing the foundation needed for years of heavy use. It’s important to note that batting cage kits come in various sizes, and even customizable options, so you can plan for the best fit in your space. The most popular choices are 70 feet and 55 feet long, but kits are available in multiple lengths, making it easy to create the cage that matches your needs and layout. Step 2: Place Poles (01:16) Set the 21′ galvanized steel poles in the holes. Use temporary wood bracing to hold them steady while concrete sets. PRO TIPS: using a string line ensures accurate pole placement and an elevation laser measures pole height so that everything is level from the start Once the ground is prepared, it’s time to set the galvanized steel poles. This system uses six 21′ poles with top caps, designed for maximum durability and minimal clutter. Because there are no cross-members or center uprights, placement is simpler and results in a cleaner hitting tunnel. Temporary wood bracing can be used while setting the poles to keep them aligned as the concrete cures. Getting this step right ensures the rest of the installation goes smoothly and that the frame can hold up under tension once the cables and netting are attached. Step 3: Install Brackets & Cables (01:58) Attach front tab brackets and run galvanized cables along the length and ends. Keep connections loose at first for easy adjustments later. With the poles secured, you’ll move on to installing the front tab brackets and running the cable lines. The Pro Model kit includes both single and double front tab brackets with dog ears, which allow for attaching multiple tension cables from each post. Using 1/4″ galvanized steel cable, run the top linear lines (six 75′ rolls are included) along the length of the cage. End lines (four 16′ rolls) are also attached at each end to tie the system together. Secure everything with the provided 1/4″ cable clamps, tightening just enough to hold shape while leaving room for adjustments in later steps. Step 4: Install the Bridge Suspension Kit (02:32) Add the top bridge cables and turnbuckles to support the net without cross-members. Ensures strength and eliminates ricochet zones. The included Top Bridge Suspension System provides extra strength and stability. This setup uses additional brackets, shorter runs of cable, and turnbuckles to connect the cage’s upper sections. By creating a suspended bridge effect, the system eliminates the need for cross-members while keeping netting tight and properly aligned. This step is especially important for cages taller than 14′, as it helps prevent sagging and ensures the structure can handle tension across long spans. Step 5: Hang the Netting (02:54) Clip the net to cables using snap hooks, starting at corners. Configure for two tunnels or one large space with divider curtain. PRO TIP: yellow string indicates the entrance side. Now comes the most visually satisfying part — hanging the netting (not included with frame kits). Use the 210 included snap hooks to attach the batting cage netting securely to the cable lines. Start with the corners, then move along each edge, making sure the net sits evenly without twists. This Pro Model Double Lane system can support two individual hitting tunnels or one large shared space with a divider curtain. Confirm your layout at the time of order to ensure your net matches the chosen configuration. Step 6: Tighten the Turnbuckles (05:31) Gradually tighten turnbuckles until cables are firm. Prevents sagging and keeps frame balanced. Once the netting is in place, it’s time to tension the cables. The kit includes a combination of 9″ x 5/8″ and 6″ x 1/2″ turnbuckles for fine adjustments. Start loosening the slack, then tighten each turnbuckle gradually until the cables are taut. The goal here is a firm, even structure that holds the net without sagging. Over-tightening can strain hardware, so work slowly and check alignment as you go. Step 7: Attach the Bottom Cable Anchor Kit (06:25) (Optional) Run bottom cables to secure the net at ground level. Prevents pooling, wind issues, and keeps the cage aligned. For windy environments or maximum net stability, the optional bottom anchor system is a smart upgrade. It locks the bottom of the net into place using 1/8″ galvanized cable, clamps, and turnbuckles. This prevents the net from ballooning, sagging, or pooling balls along the edges. In the video, Coach Moore demonstrates how to anchor these lines securely into the ground, ensuring the net maintains its shape even under heavy use. Step 8: Finishing Touches (07:10) Double-check all clamps, bolts, and net alignment. The result: a pro-level, durable batting cage with clean open space. With the frame, cables, and netting in place, it’s time to step back and admire the finished cage. At this stage, check every connection point for stability and inspect the net alignment. Small tweaks here can make a big difference in performance and longevity. The result is a professional-grade batting cage that provides maximum reps, minimal clutter, and the durability to withstand year-round training. Whether used for two separate tunnels or one large shared space, the Pro Model Double Lane Frame delivers elite-level performance for serious programs. Contact Us Now you’re ready to install your own outdoor batting cage. If you have any questions, we’re here to help: Contact us today for a free quote and expert guidance. 1-800-877-6787 Monday through Friday 8:00 AM to 5:30 PM CST. Follow us on Facebook for more inspiration and exclusive discounts.
Schedule an Appointment
Contact Us
Sign In